Different Tanks But Same Coils
In the vaping market there is a wide range of different E-cig companies, with their wide range of different tanks and different coils, in the first place it can sometimes be hard to keep up with all the new items but also the coils can become harder to find.
This is where, as a matter of fact, some people will get stuck with not being able to find coils for their current tank or have coils for tanks that they can no longer get.
One of our colleagues did some research and found a selection of different tanks that even though have their own coils, can still be used with each other.
These are split into 2 categories, too make it a bit easier.
So if you have any of these tanks or coils, therefore these can be used in-conjunction with each other;
Updated: June 2019
- Advken Mesh Coil, these are used in the Advken Manta Tank
- Artery AT22 coils, these are used in the Artery AT22 tank
- asMODus Ohmie coils, these are used in the Asmodus Ohmie Tank, although see below for exception(1)
- Coil Art Mage Coil, these are used in the Coil Art Mage Sub-Ohm Tank
- Eleaf HW Atomizer heads, these are used in the Ello, Ello Mini tanks, Ello Vate, Ello Duro and Ello Pop Tanks.
- E-XY T1 coils, these are used in the E-XY T1 RBA Tank
- Famovape Fat Baby Mesh Coils, these are used in the Famovape Fat Baby Mesh tank
- iM4 coils, these are used for the Illusion Mini Tank
- Geekvape Mesh Coils, thus these are used in the Geekvape Shield, Aero and Aero Mesh Tanks
- Geekvape Super Mesh Coils, these are used in the Geekvape Shield, Aero and Aero Mesh Tanks
- Hellvape Mesh H1 coils, these are used in the Hellvape HellBeast tank
- iJoy XS coils, these are used in the Ijoy Exo S and Ijoy Exo X
- Joyetech ProCore Aries coils, these are used in the ProCore Aries tank, although see below for exception (2)
- Karnoo T1 coils, compatible with the Karnoo T1 Tank
- OBS M series coils, used on the OBS Damo Tank
- Peacemaker Squid Industries Coils, these are used in the Peacemaker Tanks
- Sigelei SM coils, these are used for the SLYDR M Sub-Ohm tanks and the KAOS Sub-Ohm Tank.
- SMOK TFV8 baby coils, these are used for the SMOK TFV8 Baby Beast Tanks and Smoke TFV12 Baby Prince Tanks
- Squid Ind. B1 & B4 coils, used in the Squid Ind. Peacemaker RTA,
- Teslacigs HP coils, these are compatible with the Teslacigs H8 Mini Tank
- Vapefly Fantasy Mini M8 coils, these are used as an alternative to the SMOK TFV8 Baby Beast, SMOK TFV8 Big Baby Beast, Ijoy Exo S and Ijoy Exo X
- Vaporesso GT coils and GTM Coils, these are used in the Vaporesso NRG SE Tank and the Vaporesso Cascade tank, although see below for exception (3)
- Vaporesso NRG coils, these are used in the Vaporesso NRG Mini Tank
- Vaportech’s VTech Coils, thus these are used in the Vaportech’s Ark, Morpheus SF and Flip SF tanks
- Vaptio Frogman coils, these are used for the Frogman Tank
- WOTOFO FLOW coils, these are used for Flow SUb Ohm Tank
- Fireluke Mesh Coils, used in the Freemax Fireluke Mesh Tank
- Freemax Mesh Pro Coils, used in the Freemax Mesh Pro Tank(4)
- Twister Coils, used in the Fireluke M and Fireluke 2 tanks
- Vapeston Avatar coils, used in the Vapeston Avatar Mesh Tank Nano
- VooPoo U-Force Coils, used in the VooPoo U-Force tanks
These coils can be used with each of the tanks mentioned, although this may be true there is an exception (see below).
(1) The Baby Beast Coils uniquely do not fit into the Asmodus Ohmie Tank
(2) ProCore coils fit the Big Baby Beast Tank but NOT the 22mm Baby Beast Tank, The Baby Beast Coil will fit in the Joyetech ProCore Aries Tank
(3) Eleaf HW and also the E-XY T1 coils do not fit into the Vaporesso Cascade Tank
(4)These coils are not compatible with the Fireluke Mesh Tank
Any queries you can always contact us via Facebook or by email [email protected]
343 responses to “Different Tanks, But Same Coils Part 1”
Great help thanks.
Not a problem Gary we will be doing a couple more soon
Could you find out what could fit on a captain x3 tank
I have looked into these before and unfortunately could not find any compatible coils that work with the tank, other than the coils that come with the tank.
Hi, is there any rba coils that can fit the falcon king tank?
The iJoy Avenger coils work
Will Avenger take big baby beast Q2?
I did some research online and was unable to find any definitive information, sorry.
The new voopoo uforce t2 tank , is the freemax coils compatible
The Freemax Fireluke mesh coils are compatible
Not related, but is because you brought up the Uforce. If you’re looking to expand the capacity of the Uforce, Uforce T1, or Uforce T2 to the 8ml bubble that Voopoo released, hold on to your O-rings!! Voopoo does NOT sell the o-rings aftermarket independent of the tank, meaning they want you to buy a complete new tank when all you need is o-rings. Inked Atty makes a 5ml expansion bubble but they sell it with an o-ring set of their own to make it work. One would think that since Voopoo released an 8ml bubble that they can just pop it on, but unless you have the original o-rings from Voopoo it won’t work. Why? Because Inked Atty’s o-rings are too fat to work with the 8ml bubble glass released by Voopoo.
Do you know if the Fire max would work with the Vaporesso GT Core Coils??
I’m afraid the FireLuke tank isnt compatible with the Vaporesso GT Coils.
Iv bought some tfv8 baby q2 coils for my x-baby beast tank, will they fit or do I have to use solely the x-baby q2 coils?
I’m afraid the X-Baby has it’s own set of coils that aren’t compatible with any other coils or tanks.
Is the tank that fits the X Baby coils compatible with the iJoy Diamond mod?
Is there an updated list with all the new tanks and coils that have recently came out! Thanks ! This is very helpful and much appreciated!
Also , I have the GeekVape aero tank and the horizon falcon and I’m wondering if there’s any coils that would fit either! Again, thanks a lot!
The Geekvape Aero tank are compatible with the coils in this list.
The Horizon Falcon Tank unfortunately I could not find any other coils that are compatible.
in the horizon falcon I believe eHpro Raptor coils fit
Is there any compatible with MFeng tank
I’m afraid it is only compatible with the coil provided.
This is actually Really good to know ?… so let me get this right, I have the Ello Duro Tank so the Smok coils and the Vaporesso Cascade coils will fit in the Ello Duro?? TIA
Yes they are all cross compatible.
Awesome ?… Appreciate your help and replying so fast ?
This list needs a serious update!!! There’s much more stuff on the market that needs examined. My 2 cents worth:
A. Baby beAst compatible coils
1. Advken manta/dominator
2. Wotofo flo pro
3. Hellvape hellbeast
4. Digiflavor Spectre
5. OBS Cube
6. Vaporstorm hawk
B. Smok prince compatible
1. Desire bulldog/mad dog
2. Smoant Naboo coils
3. Avct avictor resin
4. Waiting on confirmation for sense screen coil
C. Smok baby V2 compatible
1. Coilart lux coils
D. Horizontech falcon
1. Augvape skynet coil
E. Freemax mesh pro
1. Augvape Skynet Pro
2. Rincoe metis mix coil
3. Cks bolt
Thanks for the input, Jesse
Thanks for the update. I agree, the list is ancient. I was inquiring into the lux 200 coils. Now thanks to you now know I can use the falcon coils.
Debbie, it says Lux compatible w/V2 not Falcon
Sorry, meant Debi not Debbie! Lol
So I hear the Baby V2 flavor is phenomenal- but I think it’s an ugly tank…so if I’m reading The List right I can put the V2 coil in a Coilart Lux tank, correct?
Thanks for the updated list Jesse.
Would you or anyone else happen to know what RBA decks are compatable with the TVF12 Baby prince tank..trying to source a TVF12 Baby prince RBA deck has become a bit of a nightmare, so wondering if any of the others will fit my tank instead.
Can u use baby beast coils on an aero tank
Yes, plus everything in Grp A above
Probably a long shot, but was wondering if you knew of any alternative coils that would fit my Horizontech Cerakoat tank?
I’m having lots of trouble locating the manufacturers coils for this great tank, so am hoping other brands still current, would fit.
I couldn’t find much about the tank, though somebody did say the tank is an Aspire Cleito Clone. So maybe the Aspire Cleito coils might fit. Apart from that I couldn’t see anywhere if there were any alternative coils.
Thanks for your reply.
I can’t find a lot of info about this tank or coils either, shame as it’s a good tank.
I’ll look into that Aspire Cleito, fingers crossed the coils match.
Hi Again Empvap,
Thought i’d update on the Aspire Cleito coils and the Horizontech Cerakoat tank…they don’t appear to be compatible as the Cerakoat coils use a Female / internal thread at the top end, but the Cleito coils use a Male thread, so obviously won’t work.
I suppose my only option would be to try rewicking my original two coils.
I was unsure if they would, that’s a shame it didn’t.
redoing the coils is probably your best thing to do.
I HAVE A BUNCH I AM LOOKING TO GET RID OF 636-587-6378
Is any of the baby beasts compatable w the vaporesso skrr or skrr mini?
Hi Douglas, after doing some research online I was unable to find anyone suggesting Baby beast coils work with this tank, sorry.
The v8 coils work in the skrr. I have done it. They are not very good. I just picked up the Eleaf HW1 coil for the skrr and it seems to be much better.
The SKRR is backwards compatible with the GT coil heads (per Vaporesso) so, Yes the BB coils should fit ‘cuz they’re compatible with the GT coil heads.
Hello were you able to find out if these coils were compatible? I’m actually trying to find out the same question please!
The coils do seem to be compatible with coils above.
After doing more research for updating the blog, I have found that the Vaporesso Skrr can use the coils above.
What about for the snowwolf mfeng?
Hi Keiron, the Snowwolf tank seems to only use the WF coils. If there is an update on that we will update the blog.
Are there any coils that are cross conpatible with the uwell valyrine??
I’m afraid the tank only takes the Valrian Coils. They aren’t even cross compatible with other UWELL products
Does anyone know of any coils that fit the IPV v-it tank?
I tried Sigelei SM coil the top threaded fine but the base threads a tad small for the base threading..
Thanks for any help if there is.
I’m afraid I cannot find anything about the coil compatibility with that tank.
Sorry I couldn’t help any further with your enquiry.
Thank You , what a bumer good little tank I got for 5$ but no other coils fit.
Can anyone tell me an rba that fits the ello duro?
I’m afraid there isn’t one available. Even though the coils that are compatible with the Eleaf Duro have RBAs those RBAs don’t fit onto the Duro.
I have found that the TFV8 Big Baby Beast (LED) tank is also compatible with the GeekVape coils for the Aegis Legend tank that originally comes with the Aegis Legend Kit. My husband is using a low wattage coil from Geekvape in my old TFV8 Big Baby Beast currently with no leakage or any other problems. 🙂
Is every coil you listed here compatible with the next? Also, can i use big baby beast coils in the sigeli snowwolf tank?
Hi. I know this is an old thread, but I’m looking for some help. I have a Rincoe mechman 80w that my son gave me for my birthday, but nowhere has replacement coils. I’m starting to think they discontinued them completely. Is there another tank and coil assembly I can use? I hate to scrap it, not only because I really like it, but because my son bought it for me. Any way to salvage this?
Maybe coils freemax twister or fireluke ….x1 or tx1, but ididnt try.
Just wondering if you know of any coils that fir the famovape fat baby?anyone know if any other coils fit famovape fat baby?
Couldn’t find much with the tank. Looking at other people’s reviews of the tank and coil, it looks like it is only the coils that come with the tank are compatible with it.
Though they do look like baby beast coils, I would have thought that they did fit, but couldn’t find any evidence on that.
So, after getting a few people in at the vape shop I work at, I decided to do some researching on this since the famovape and smok baby coils look pretty much the same. A regular came in and left me one of his old burnt famovape coils with me. I read this and decided to try the old coil in a smok baby tank and i can confirm that the famovape coil did fit and fired from a baby V8 smok vape pen. I can only assume that they are indeed cross compatible. Hope this helps =)
Thanks Jennie, that is helpful, sometimes a coil looks similar to another and you can’t tell if it works unless someone tries it.
The Famovape Fat Baby coils are just a TAD taller than any Baby Beast Compatible coil. They do thread but then the top doesn’t screw back on. I could not find any coils that fit the Fat Baby tank and it looks like they may be discontinued. I might be wrong on that.
What will fit in my ijoy avenger tank can someone please tell me because the ijoy coils that go with it dont last and burn up really fast
Can the new species baby v2 tank use old baby t8 tanks or vaperesso tanks with ghe quand coils? Thanks.
They don’t I’m afraid, at this moment only the coils with Baby Beast V2 fit that tank.
Will the fireluke mesh coils work. . . . ?
I’m afraid they don’t work with the Baby V2.
Does anyone know if there are any compatible coils with the Wolf mini tanks?
After a search online I have yet to find a compatible coils from other manufactures for this tank, this may change in the future.
i noticed the cerberus coils fit in the vapresso skrrr tank perfect. Is it ok to use these coils in the skrrr?
Will the vapresso GT Coils fit in a geekvape Cerberus tank? Thanks
Thanks to Jesse Chhim who checked that the Baby Beast Coils do not fit into the Asmodus Ohmie Tank.
Hello, I’m new to vaping and I’m wondering if TFV8 Baby Big coils would fit in a TFV8 X-Baby Big tank.
Thanks for your help ^^
The X-baby coils are larger than the baby coils, so unfortunately the coils are not compatible.
So does that mean that it can’t go the other way? The x-baby replacing the baby coils?
I’m afraid they don’t as one uses top airflow system and the other uses bottom airflow. With the different size also they aren’t compatible with each other.
Do any other coils fot the ohmie tank
What is on the list unless stated should fit the Ohmie tank, the Eleaf HW coils we have in our stores if it something you are looking from us?
Will the falcon coils fit in a smok resastick
Unfortunately the Falcon coils are not compatible with the prince tank the resastick comes with.
Hey i have the Eleaf Melo 4 Tank and i was wondering if there are any other compatible coils that can reach over a 100w without burning and stuff? Because right now im just using their 30-100w coil and its fine but i wanted to move up to a higher amount of wats but it burned.
Having a look at the tank and looking at other sources, the MELO 4 tank does take the older MELO coils (though I can’t be 100% correct as it is through other peoples view points). On our other blog https://empvap.com/interchangeable-coils-classic-tanks/ there are 2 types of coils that can fit into the MELO tank and that is the ECML and ECL coils. The ECML are 0.75 ohm coils so that wouldn’t be what you are looking for.
The ECL coil is 0.18 ohm, that may be better what you are looking for. I couldn’t see when looking what it’s ideal range is for usage though.
Awesome thank you so much for this information because I have the big baby Beast the baby Beast and the vaporesso
And I love the smaller coils because it has so much more flavor without having to use the drip
Just a quick one. Are all tanks interchangeable? I’ve a revenger mini with only a 2ml tank and was wondering if I can just change to a larger tank without problem… It’s quite small
In terms of changing tanks on different batteries, nearly all tanks have the same fittings that go onto a battery. If it is in terms of glass, coils and spare parts these are sometimes specific to the companies and also to the different models of tanks. In these blogs we found that some did have same fittings with coils which does make it more helpful when trying to find coils for your device.
If you are asking if you can use different coils in the NRG SE tank that came with the Vaporesso Revenger Mini, I can verify that Smok Baby Beast Mesh coils will work in it, ive used them in my NRG and my Girlfriends NRG SE. I will say the bottom part of the coil needs to be pulled down just a tad bit as it doesnt contact the positive pin on the base. The vapor and flavor production is fantastic with these coils.
Ihave a baby beast and am looking for a ceramic coil any suggestions? will the sense ceramic work?
I did some research but couldn’t find the sense ceramic coils for the baby beast only for the TFV12 and TFV8, this doesn’t mean they don’t exist just that I couldn’t find them. hope this helped a little.
thank you I can not seem to find any either.
The Vaporesso GT CCELL coils will fit just fine!
Keith is right, am using the Vaporesso GT cCELL 0.5ohm cols on my TVF8 BBB as I’m typing this post. Oddly, for whatever reason, when installed in the intended NRG Tank, keep getting ‘Check Atomizer’ error.
Yet am happy to have a tank that these works with perfectly!
The other coils which works with the NRG also does with the TFV8 BBB & are of higher quality than the SMOK brand. These can be reused over & over again by soaking in Everclear or other high proof clear liquor for 12 hours, followed by a rinse in hot water, then a soak in hot water for 12 hours, followed by sitting the coil in an A/C vent or in a sunny place for a day or so. I learned the tip via one of Rip Tripper’s YouTube videos, a true cash saver. Brings the Vaporesso coils back to 95% life, as long as not too badly clogged, if so, then 80-90%. One can use a tiny instrument after the liquor soak, such as a toothpick, to break loose any gunk before rinse & final soak. The main thing being able to insert the toothpick all the way through each hole in the coil.
will fire Luke mesh coils work in a baby beast?
I’m afraid they won’t. I had a good look online to find out which tank they were compatible with, some people think the TFV12 Prince might be okay but there was no solid answers.
They did say that the VooPoo UForce are compatible, but I have never seen them myself so can’t be certain if those work in the Prince tank or any other Smok tanks.
So that means that I can put a ProCore2 in my NRG tank and a GT core in my eVic Primo SE, which comes with procore coils?
Thanks in advance
Hi DanH, if the Primo SE takes the ProCore coils then the all the coils on the list should fit, I couldn’t find anything specific about that tank though so I can’t be 100% sure
Thank you for your answer. I will try that shortly, because vaporesso brand is not available in my country, only by online purchase. Joyetec is in every other store, however.
TFV8 coils. They fit the Sense Blazer 200!
I recently was bought a aegis legend by geekvape and was wondering if smok coils would work on it as i had a smok previously any information would greatly help
They are compatible with the Smok TFV8 Baby beast Coils. That said if they fit that then they may possibly fit the other coils that are compatible with the Smok TFV8 Baby Beast coils
The wismec kage coil looks like the baby. Will the baby fit it?
I had a look, I think unfortunately from what I could find that the Kage Coils only fit the Kage Tank, and no other coils fit into either I’m afraid.
Brought a smok prince tfv12 tank and the coils are no good does any other company make coils for these tanks.