Different Tanks, But Same Coils Part 1
Showing 1–24 of 25 results
-
Aspire BP Coils
£3.00 – £12.00 Select optionsAspire BP Coils
The Aspire BP coils are compatible with the Aspire Onixx Kit, the Aspire BP60/BP80 Pod Kits, the Nautilus Prime X Kit, the Aspire Finixx Kit and the Finixx Pod
Two variations are available:
- 0.17Ω Mesh – Ultra Smooth
- 0.3Ω Mesh – Intense,rich flavour
Watch for updates on our Facebook and Twitter to get information on new products when they arrive.
-
Falcon Sector Mesh Coils
£5.00 – £13.00 Select optionsFalcon Sector Mesh Coils
Authentic Falcon Sector Mesh Coils from Horizontech.
The main reason why the Falcon 2 Sector mesh coils (Falcon II) are recommended for sub-ohm vaping is that they have a resistance of 0.14ohms and work up to 75W.
For an out-of-this-world experience, we recommend using a high VG e-liquid with the Falcon 2 coils.
It will produce bigger and better clouds than an e-liquid with a high PG%.As with all Falcon coils, these are renowned for their unique mesh design, increased flavour, and cloud production.
-
Innokin S-Coil
£2.00 – £8.00 Select optionsInnokin S-Coil
The Innokin S-Coil can be combined with the Innokin Sceptre 2 vape kit as well as the Innokin Sensis pod kit. These compact coils are available in three different resistances; 0.25 Ohm, 0.6 Ohm and 0.65 Ohm giving you the choice of an MTL (Mouth To Lung) or an RDTL (Restricted Direct To Lung) inhale. These compact coils feature a mesh construction, which vaporises more e-liquid with each puff improving flavour production.
-
Innokin T18 Coil
£2.00 – £8.00 Select optionsInnokin T18 Coil
The Innokin T18 Coil (Prism Coil) has been designed to fit the Endura T22 and Endura T18 vape tanks only. There is another model available to fit the T22E and T18E Tanks. The coils register at 1.5 Ohm resistance. The Prism Coil is designed for mouth to lung vaping, therefore this makes it a good option for new users or advanced users looking for a discreet vape.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
-
Innokin T18E Coil
£2.00 – £8.00 Select optionsInnokin T18E Coil
The Innokin T18E Coil (Prism Coil) has been designed to fit the Endura T22E and Endura T18E vape tanks, as well as the Innokin M18 pod kit. There is another model available to fit the standard T22 and T18 Tanks.
The Prism coil is designed for low wattage mouth to lung vaping, making it a good option for new users.
Like most of the Innokin Coil range – the Prism utilises the ‘no spill coil swap’ system. Where each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.
-
Innokin Zenith Plex Z Coil
£2.50 – £10.00 Select optionsInnokin Zenith Plex Z Coil
The Innokin Zenith Plex Z Coils can be used with the Innokin Zenith Vape Tank, Innokin Z-Biip pod kit and Kroma-A Vape Kit only.
These replacement coils use Plexus Technology, which utilises a mesh coil build. Therefore this results in a larger surface area for faster wicking and heating. Which in turn, allows for improved flavour from e-liquids and a longer lifespan.
-
Joyetech EN Coils
£3.00 – £12.00 Select optionsJoyetech EN Coils
The Joyetech EN coils are designed for the Joyetech EVIO C and Joyetech EVIO Box kits. This Innovative coil utilises austenitic stainless steel for its performance when heated. These properties result in great flavour and a long lifespan. The coils push fit making it easy to swap out with no mess.
-
VooPoo PNP Coils
£3.50 – £14.00 Select options -
VooPoo TPP Coil
£4.00 – £10.00 Select optionsVooPoo TPP Coil
The VooPoo TPP coils are convenient, easy to use, and designed for powerful cloud chasing performance. Featuring extra-large wicking areas. A push fit system allows for rapid replacements when needed, and the larger mesh surface area ensures large cloud production when used at high wattages, faster heating, and full e-liquid flavour.
These coils are used in the Drag 3, Drag X Plus, Drag X Pro, TPP Pod, TPP X Pod, and TPP Tank
Coil resistances
- 0.15Ω DM1 60w – 80w
- 0.2Ω DM2 40w – 60w
- 0.15Ω DM3 80w – 100w
- 0.3Ω DM4 32w – 40w
Coils are sold individually or in packs of 3
Keep up date to date with more information from Emporium Vapour on our Facebook
-
Aspire BVC Coils
£2.50 – £10.00 Select optionsAspire BVC Coils
New Aspire BVC Coils for use with Aspire Tanks. The Aspire Bottom Vertical Coils are a direct upgrade to the BDC (Bottom Dual Coils).
Available in 1.2, 1.8 and 2.1ohm resistances. Compatible with Aspire Ce5, ET-S, Maxi and K Series tanks.
Watch for updates on our Facebook and Twitter to get information on new products when they arrive.
-
Aspire Cleito 120 Coils
£4.50 – £18.00 Select options -
Aspire Cleito Coils
£4.00 – £16.00 Select optionsAspire Cleito Coils
The Aspire Cleito Coils are designed for the Aspire Cleito EXO, Aspire Cleito and Aspire Cleito Pro
The Aspire Cleito coils are a Direct to Lung, mid-to-high level kanthal wire coil, thus allowing you to get the most flavour out of your liquid.
The ideal coil ranges between 55 and 70 Watts at 0.27 ohms and 40 to 60 Watts at 0.4 ohms.
Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Aspire Cleito Pro Coils
£4.50 Select optionsAspire Cleito Pro Coils
The Aspire Cleito Pro Coils are fully compatible with Aspire Cleito EXO, Aspire Cleito and Aspire Cleito Pro.
The Cleito coils are a Direct to Lung, mid-to-high level coil, thus allowing you to get the most flavour out of your liquid.
The latest addition to the Cleito coil family was introduced with the Cleito PRO tank.
So if you own any of the tanks above take your vape to the next level as the all new 0.5ohm coil runs 60 – 80 watts and delivers great flavour.
The internals of the coil have been reworked as well to wick easier and prevent dry hits.
Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Aspire Nautilus Coils
£3.00 – £12.00 Select optionsAspire Nautilus Coils
The Aspire Nautilus Coils are fully compatible with the Aspire Nautilus 2S, Nautilus 2, Nautilus Mini and the K3 tanks.
These innovative Vertical Coil heads offer a unique design, making these atomizer heads last longer than others.
The 0.4Ω for traditional e-juice and a direct to lung vape. These coils will deliver full flavor and a cool vape with each puff. The wattage range for the 0.4Ω coil is 23-28w
The 0.7ohm “Direct to Lung” option is a low to mid-power level coil, thus allowing you to get the most flavour out of your liquid. Featuring a Kanthal wire, the coil ideally operates between 18 and 23 Watts.
The 1.8ohm “Mouth to Lung” option is low-power level coil, made for vapers who enjoy a full-flavour draw. Due to the narrowed airflow, you can enjoy a tighter draw that doesn’t produce as much vapour. You can fire this coil anywhere between 10 and 14 Watts.
Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Aspire Nautilus X coils
£3.50 – £13.50 Select optionsAspire Nautilus X coils
The Nautilus X coils incorporate U-Tech, thus enables air to flow through the U-shaped chamber. This then allows airflow to pass through the Kanthal coils twice before being inhaled. This all-new airflow performance allows for unrivalled vape flavor and e-juice taste. The Aspire Nautilus X coils are rated at 1.5Ω (14-20 watts) and 1.8Ω (12-16 watts).
Like all Aspire products, each Aspire product feature Aspire’s genuine product check code, therefore you can be sure you have the real deal.
Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Aspire PockeX Coils
£3.50 – £13.50 Select optionsAspire PockeX Coils
Designed for the Aspire PockeX Pocket AIO Kit.
The PockeX Coils utilises our U-tech coil technology, specially designed to ensure a better vaping experience. There are 2 coil resistances to further satisfy your vaping preferences. The 0.6ohm 316L stainless steel coil is good for both flavor and vapour production, while the 1.2ohm Kanthal coil is a perfect choice if you prefer high nicotine e-juice.
Like all Aspire products, each Aspire product feature Aspire’s genuine product check code so you can be sure you have the real deal.
Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Eleaf HW Coils
£3.50 – £15.00 Select optionsEleaf HW Coils
The Eleaf HW coils are a multi use coil. It can be used in many different tanks. Please check out our link to our blog below, for details as to where you can use them.
Specification
- HW1: 0.2Ω
- HW1-C: 0.25Ω
- HW2: 0.3Ω
- HW3: 0.2Ω
- HW4: 0.3Ω
- HWN: 0.2Ω
- HWM: 0.15Ω
Watch for updates on our Facebook and Twitter to get information on new products when they arrive.
-
Joyetech BFHN Replaceable Coil
£3.00 – £12.00 Select optionsJoyetech BFHN Replaceable Coil
Joyetech BFHN Replaceable Coil is a 0.5ohm coil head and these are used in the Joyetech eGo AIO ECO.
The BFHN coils are optimised for use with high nicotine liquid and it supports mouth-to-lung inhale.
The low power consumption allows the battery to have a very low output, which extends the battery life doubly.
-
Joyetech EX Coil
£3.00 – £13.50 Select optionsJoyetech EX Coil
Designed for the D19 EXCEED atomizer. The Joyetech EX coil series includes the DL EX 0.5 ohm and the MTL EX 1.2 ohm.
-
Joyetech Penguin Coils
£3.25 Select optionsJoyetech Penguin Coils
Designed for the Joyetech ATOPACK Penguin.
The Joyetech Penguin Coils series include the JVIC1 MTL 0.6ohm, JVIC2 DL 0.25ohm and JVIC3 MTL 1.20hm. Capitalizing on a revolutionary method of vertical juice injection, the ceramic cradle delivers outstanding flavour and vapour production. On top of that, the easy to replace design, makes changing coils as simple as pushing the coil into the Joyetech Penguin Cartridge.
The JVIC3 “Direct to Lung” option is a low to mid-power level coil, thus allowing you to get the most flavour out of your liquid.
The JVIC1 and JVIC3 “Mouth to Lung” options are low-power level coils, and are designed for vapers who enjoy a full-flavour draw. Due to the narrowed airflow, you can enjoy a tighter draw that doesn’t produce as much vapour.
Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Sale!
Joyetech Teros Cartridges
£3.00£1.50 Select optionsJoyetech Teros Cartridges
The Joyetech Teros cartridges are designed for the Joyetech Teros pod e-cig. These spare cartridges feature a fitted non-removable atomizer head.
The TEROS utilizes a convenient filling system. Having a refillable side filling solution, it offers 2ml e-liquid capacity which is TPD compliant.
Ideal significantly as a spare or replacement for your Teros e-cig.Closed Pod System
A closed pod system, the coil inside the Teros Cartridge cannot be changed, but can be refilled. This means you can have separate pods with different flavours and strengths.
Also thanks to how easy the TEROS is to use, swapping them over is a breeze.Watch for our updates on Facebook and Twitter to get information on new products as they arrive.
-
Kanger Single Coils
£2.00 – £8.00 Select options -
Vaporesso GTi Coils
£3.50 – £14.00 Select optionsVaporesso GTi Coils
The Vaporesso GTi coils are designed for direct lung vaping. They are compatible with the Vaporesso Gen S80 and Vaporesso Gen 200 kits. These kits use the iTank and come in 0.20Ω and 0.4Ω coils. The coils are not compatible with the iTank M which takes MTX coils.
0.2Ω coil, wattage range 60-75w
0.4Ω coil, wattage range 50-60w
0.2Ω coil, wattage range 60-75w
0.4Ω coil, wattage range 50-60w
Watch for updates on our Facebook and Twitter to get information on new products when they arrive.
er kit).
-
Vaporesso MTX Coils
£2.75 – £11.00 Select optionsVaporesso MTX Coils
The Vaporesso MTX Coils are replacement coils for the Gen Fit Kit which uses the iTank M. Does not work for the iTank which takes GTi coils.
1.2Ω coil, wattage range 8-12w
Watch for updates on our Facebook and Twitter to get information on new products when they arrive.
er kit).
